QQI Level 5 Building Services 5N4974 Assignment Example Ireland
In this assignment sample, we shall discuss the course module of 5N4974 Building Services QQI Level 5. We shall also discuss in the learning outcomes in detail and assessment techniques used for the assessment evaluation of the learners.
The purpose of the minor award is to make learners skilled, efficient, and competent to be able to recommend a wide range of practical solutions in the context of designing and maintenance of the building services in domestic dwellings. The QQI component of this course has 15 credit values in the (NFQ) National Frameworks of Qualifications.
Course Title – Building Services
Award Type – Minor
Code – 5N4974
Level – 5
Credit Value – 15
Learning Outcomes of the 5N4974 Building Services QQI Level 5 Course
Building services is the discipline of engineering that helps in the achievement of a sustainable, safe, and comfortable indoor environment while minimizing the risks of environmental conditions of a building.
This assignment solution shall cover the key characteristics and properties of materials used for the water, drainage, heating, and electrical systems in a domestic dwelling, installation procedures of such systems, impact of the renewable energy technologies on the building services, symbols, and unit of measurement used for the building services and construction products, etc.
These are the following learning outcomes of 5N4974 Building Services QQI Level 5 assignment activity:-
Analyzing Characteristics and Properties of Materials used in the Water, Drainage, Heating, Electrical System in Domestic Dwelling
Before the construction of the building and domestic dwelling, various systems and services need to be installed such as water, drainage, heat, and electrical systems. The learners shall be able to analyze the materials, characteristics, and properties which are used for the building of systems in a domestic dwelling.
For a connection of drinking water supply in a domestic dwelling, the pipes are used which are different from the ones which are used for carrying the drainage water. Some of the common materials used for the water supply pipes in the dwelling are galvanized steel with a zinc coat, copper, PVC, CPVC, iron, stainless steel.
While for a drainage system in the dwelling the different pipes like the soil pipe, vent pipe, rainwater pipe, wastewater pipe, and anti siphonage pipe must be used. A wide range of heating systems is used for heating the buildings and a central heating system is used for the dwelling.
There is also renewable heating system like the water source heat pumps, solar thermal panels, biomass boilers, ground-source heat pumps and electric heaters which are used. The materials used in these heating systems are iron chrome aluminum alloys, iron chrome aluminum PM grades, nickel-chrome alloys with different properties of these elements that must be studied by the learners.
The electrical system used in the dwelling uses different types of materials which are electricity’s good conductors and insulating. Electrical wires are made up of aluminum, copper, and silver which are great conductors of electricity with distinct properties of such metals.
Learners shall be able to analyze the wide range of materials, their properties, and characteristics which shall be presented in form of a portfolio or collection of work.
Outlining the Procedures of Installing Water, Drainage, Heating, Electrical System in Domestic Dwelling
The learners shall be able to learn the installation procedures for the water, drainage, heating, electrical system in the domestic dwelling. For effective drainage system installation tools and materials are required. The subsurface and surface drainage systems can be installed which uses either groundwater pipes, interceptor drains, mole drainage, and slotted subsurface pipes.
For the heating system, the heat pumps need to be installed and before doing so a home survey needs to be done by an appointed person who can identify insulation measures. Heat pump installation in the dwelling must be done only when it is airtight and insulated. The heating system can be either Space Heating Zone or Domestic Hot Water Zone.
For central heating, the boilers and radiators and laying of pipes and control system installation must be selected. A certified contractor needs to connect the boiler to the gas supply and for installing the central heating system on the gas boiler.
- First the equipment used for the heating should be researched.
- A map should be created for such a heating system in a dwelling.
- Important parts to be installed.
- Install the radiators.
- Laying pipes from such radiators.
- Installing the control system.
- Shutting water and gas supply for installing a boiler.
- Finally installing a central heating system.
While installing the electrical system in a domestic dwelling one needs to design a wiring diagram, install conducts, and the circuits. The learners shall present their learning outcomes in the form of a collection of work at regular intervals.
Outlining the impact of the Renewable Energy Technologies on the Design of Building Services
The learners shall be able to outline the impact of renewable energy technologies on various systems used in the buildings and dwellings. For this zero passive building design is very important for the construction of energy-efficient buildings. This shall be followed by the use of low energy building materials and use of efficient equipment and finally integration of renewable energy technologies for application.
The lighting, refrigeration, and heating in the building should be done only with clean renewable energy. The solar passive building techniques before designs are very important for passive heating and cooling. An integrated renewable system can be used for water heating, electrification, and solar photovoltaic.
The use of solar, wind, and geothermal energies can be increased which shall make the energy-efficient buildings. This shall be asked by the examiner in the theory-based examination for an assessment of the learners.
Symbols and Unit of Measure with Building Services and Construction Products
All the building services symbols are drawn in different sizes in accordance to use in the construction industry and the architectural drawings. The blueprint drawings in the building construction use graphic symbols and straight lines.
These graphic symbols are used in building plans which are applied for making gas and water services lines, finishes, floors, windows, and door types, etc. The specific symbols are used for electrical companies as well.
The measurement shows the description of quantities, values, cost, and price construction work. The unit of measurement for the construction depends on the nature, shape, and size of the work. Some of the methods of measuring the unit are- earthwork, backfilling, brickwork, concrete work, tile flooring, stonework, plastering, painting.
Questions can be asked in the exam related to the symbols and various units of measurement for the construction activities and the building services.
Assessment Techniques for the 5N4974 Building Services QQI Level 5 Course
To display the skills, competence, efficiency, and knowledge of the learners and analyze that whether they have achieved their learning outcomes.
The learning assessments need to be undertaken by the learners.
All learning outcomes must be assessed and achieved with the help of the minimum intended module learning outcomes set out in the validated program.
The assessor devises the various assessment instruments which need to be inconsistent with QQI’s assessment requirements.
Examination Theory – 40%
Collection of Work or Portfolio – 60%
- Examination Theory shows the ability of a learner to recall his knowledge and skills within a set period of time and application of specific theory and knowledge.
- Portfolio or Collection of Work is a collection of work which is in the form of pieces produced by the learner over a certain period of time providing a clear picture of the learning outcomes of the learners. Such collection may be self-generated or in response to the range of activities devised by the assessor.
Get Answers of 5N4974 Building Services QQI Level 5 Assignment
The above-written assignment example is based on the 5N4974 Building Services QQI Level 5 course module.
Our Dissertation help in Ireland is a well-known service, not only that we are widely known for assignment writing help Ireland students often ask us to do my assignment and we are ready to help them anytime.
We have assignment samples on Architectural Drawing QQI Level 5, work experience diary, learner record samples, Building Construction QQI Level 5, Construction and Engineering Technology QQI Level 5, Project Management QQI Level 6, Civil Engineering QQI Level 5 students can read the assignment example to gain knowledge on writing such assignments and to enhance their vocabulary skills.
- Marx’s Concept of Historical Materialism Essay Example Ireland
- 5N1553 Applied Permaculture QQI Level 5 Assignment
- 5N1439 Ecological Field Methods QQI Level 5 Assignment
- 5N2751 Laboratory Skills QQI Level 5 Assignment
- 5N5027 Sustainable Water Management QQI Level 5 Assignment
- 5N1915 Continuous Improvement in Manufacturing QQI Level 5 Assignment
- 5N4974 Building Services QQI Level 5 Assignment
- 5N4546 Bioprocessing QQI Level 5 Assignment
- 5N1570 Building Construction QQI Level 5 Assignment
- 5N1558 Architectural Drawing QQI Level 5 Assignment
- 5N4975 Renewable Energy Systems QQI Level 5 Assignment
- 5N1442 Environmental Studies QQI Level 5 Assignment
- 5N1637 Materials Science QQI Level 5 Assignment
- 4N1170 Work Practice QQI Level 4 Assignment Sample
- 4N1989 Customer Service QQI Level 4 Assignment Sample